Hp Server Fans

I give the office server problem is less useful. ?

The HP Proliant ML150 server in my office has not been started. While when it Switch at the beep. But it does not show any display on the monitor that is a fan run continuously. What is her problem? Help immediately? It sounds 7 (3 +3 +1) Stands for giving the boot the system and it is not.

Most ============================================== If you want an example, LONG Shingurubipu sound problem is RAM. As I hear the beep you get 100% do not know many do not know bacause Seoul There is a problem of RAM (about near 90%), hardware engineer, I have most of the RAM on your computer, you need to wash after the rainy season can tell Ŭ. Get the beep is not your RAM is not faulty, it means that the motherboard Correctly, you can get it or can not be detected. You can do: OFF switch, power cable and the computer, if the computer, RAM for (Lam Look UnPlug open view of the Small-scale green has resisted some black) and please, RAM memory to remove the note by pressing the white top to the bottom of the RAM holds the same lock before removing the (If more than one other RAM RAM not the same thing kangaroo) eraser (rubber pencil) to get a connection to the golden gently rubb, also to clean RAM slot (where ram) was mounted to clean the dust around other parts, such as graphics cards. It is clear that it is not already enough to touch (this step is optional) is after Washing in the same position, the RAM is inserted into the same slot. If you can not insert it smoothly and not force a Down (Try changing the position of the upper and lower UP) now Press gently, but it will lock itself. (The white press as RAM lock to lock it) just plug it in, it must be the computer's power cable and hasten Handling run correctly in any computer parts. NOTE: The following proper care. Also, on the ground before touching any computer peripherals (which is to clear any static electricity Body may )============================================ ==