Sata Case

What are the Sata cables?

Serial ATA, conceptual As SATA or S-ATA (Serial Advanced Technology Attachment) is long, thin, 7 Finns. It He 'replacement string' of older AT Attachment standard (ATA). SATA support Almost every ATA and ATAPI devices. These cables are integrated in Included into the laptop, HD DVD, Blu-ray, DVD or CD drive, Boards including desktop hard disk drives Other optical. These cables are usually 3 feet (1 meter) in length, and are routed to an effort to stay out Through the allocation of maximum airflow inside the case. Cable ensures faster data transfer competent And has the ability to cancel or add devices while Launch (hot swap).

Usually based on Serial ATA Serial communication. Data transmitted through a path While new data path is used to transfer acknowledgments Of receipt. On all data paths, he data Communicated through the LVDS (Low Voltage Differential signaling), which require transporting Transmit a signal wire and against the second string to allow the Receiver to reconstruct the signal by the difference. Data management, however, are on the way Same as the data through a series of specific sections To distinguish them.

History and Development SATA devices

PC-related market drive Optical disk storage devices using a deviation The IDE and ATA for 10 years. With time devices These were the sea change in their capabilities. However, beginning The year 2009 a year, replacing the legacy SATA and ATA as a parallel name ATA or PATA shipping on all consumer computers. Currently PATA remains outstanding fixed industrial applications He relies on CompactFlash storage; but a new standard for storage CFast will be based on SATA.

How She locked the product and what are his expectations from the products Her future?

SATA cable to one of the columns have a minimum Of four wires creates a Point-to-point connection devices In different. His transfer rate starts 150MBPs or 300 MB / s as against 133 MB / s maximum Technology Earlier. However, third-generation SATA I mean "SATA 6Gb / s" be Presented this year is expected to provide about twice the speed SATA previous iteration.

Ie conventional Port ATA or PATA IDE principle, to transmit data in parallel. The only advantage of broadcast simultaneously on the serial transmission He increased speed of the earlier state, given that Many pieces are sent simultaneously. However, The main drawback is the noise refers to that much Wires should be used, particularly each bit sent Each turn, one wire to create another entry. This is why Why ATA-66 hard disks and require advanced A, 80 - cable wire. This gap between the 80 - to 40-wire cable standards Wire IDE cable Is that it includes all the wire between the ground Original, providing anti-interference materials Label Stock.

How Choose good quality = "_blank target" title = "Sata cables"> Sata cables?

• Look for the brand is considered when buying a cable SATA and ensure they come with a guarantee.
• Check Connecting it directly at both ends.
• Whether These cables have Latching system.
• ensure that they support High speed data transfer rates of up to 1.5Gbps Distances of up to 3 meters.
• verify if they contain Locks and metal tab that the number of ports SATA are very wide.
• Caution if they fit the traditional 4-pin Molex connectors, too.
• Ensure Is it SATA II cable which has a speed Or data transfer rate of 3Gb / s
• If the cable is 270 ° drive SATA cable connector.

Mounting a IDE or SATA Hard Drive in a CDROM case